XPEL Paint Protection Film (PPF)
Available in two finishes, it not only protects your vehicle, but can also change the appearance by adding a factory satin/matt finish to a gloss vehicle.
Packages
Whilst the packages shown below are preselected by our team, speak to us as we can tailor a coverage for your vehicle based upon your usage and its potential high impact areas.
- Minimo
- Davanti
- Performante
- Tutti
- Custom
MINIMO – YOU HAVE TO START SOMEWHERE – FROM £595 OFFERING AN ENTRY LEVEL PROTECTION THE FRONT END OF THE VEHICLE
Includes: Front bumper, headlights and wing mirrors.
Service Duration*: 1-2 Days
Davanti – Full front coverage – From £1595
Offering full protection to the entire front end of the vehicle
Includes: Front bumper, full wings, full bonnet, headlights and wing mirrors.
Service Duration*: 3-4 Days
PERFORMANTE – OUR RECOMMENDED PERFORMANCE COVERAGE – FROM £1895
Offering full front end protection and high risk areas
Includes: Front bumper, full front wings, full bonnet, headlights, A-pillar, roof leading edge, side sills, and wing mirrors.
Service Duration*: 4-7 Days
TUTTI – FULL VEHICLE COVERAGE – FROM £3695
Offering the most protection, completely covering all external panels.
Includes: Covering all the external painted surfaces of the car.
Service Duration*: 7-10 Days
Custom Package or Design – POA
Choose a bespoke coverage or cover a bespoke vehicle
Choose to protect specific areas by forming your own package that suits your needs and budget.
We also offer a custom design package for classic, bespoke and one-off vehicles.
Service Duration*: Dependent on requirement
- Minimo
- Davanti
- Performante
- Tutti
- Custom
MINIMO – YOU HAVE TO START SOMEWHERE – FROM £595 OFFERING AN ENTRY LEVEL PROTECTION THE FRONT END OF THE VEHICLE
Includes: Front bumper, headlights and wing mirrors.
Service Duration*: 1-2 Days
Davanti – Full front coverage – From £1595
Offering full protection to the entire front end of the vehicle
Includes: Front bumper, full wings, full bonnet, headlights and wing mirrors.
Service Duration*: 3-4 Days
PERFORMANTE – OUR RECOMMENDED PERFORMANCE COVERAGE – FROM £1895
Offering full front end protection and high risk areas
Includes: Front bumper, full front wings, full bonnet, headlights, A-pillar, roof leading edge, side sills, and wing mirrors.
Service Duration*: 4-7 Days
TUTTI – FULL VEHICLE COVERAGE – FROM £3695
Offering the most protection, completely covering all external panels.
Includes: Covering all the external painted surfaces of the car.
Service Duration*: 7-10 Days
Custom Package or Design – POA
Choose a bespoke coverage or cover a bespoke vehicle
Choose to protect specific areas by forming your own package that suits your needs and budget.
We also offer a custom design package for classic, bespoke and one-off vehicles.
Service Duration*: Dependent on requirement
Features
ULTIMATE PLUS™.. the gloss one.
A virtually invisible urethane film. It protects your vehicle’s paint from unsightly damage and maximizes re-sale value. Some of its features include Self Healing, Stain Resistance and Superior Optical Clarity.
Designed to provide you with the peace of mind you need on the open road, keeping your vehicle’s surfaces safe from things like gravel, oils, bug acids, bird droppings, and stopping paint chips before they start.
STEALTH™ … the matt one.
Finally, A Paint Protection Film Specifically Formulated For Preserving A Flat Factory Finish.
As smooth as satin. Whether your vehicle is matte, magno, frozen or frosted, self-healing STEALTH™ will keep it looking effortlessly pristine. Or, protect and transform your gloss paint with a whole new look!
Features of our Xpel – Paint Protection Films
Paint protection film (PPF) is a virtually invisible urethane film. It protects your vehicle’s paint from unsightly damage and maximizes re-sale value. Some of its features include Self Healing, Stain Resistance and Superior Optical Clarity.
Heat Activated Self-Healing Protection Topcoat
The film is constructed from an elastomeric polyurethane and has a clear coat finish (available in gloss or STEALTH finish) the film will self-heal light scratches & swirl marks with a light heat application to the film’s surface .
Discoloration & Stain Resistant
Don’t worry about specs, spots, or splotches from contaminants. ULTIMATE PLUS is stain resistant & will maintain clarity under the harshest conditions.
Non-Yellowing
Our proprietary film formulation will not yellow from UV exposure, ensuring protected areas are nearly invisible.
Prevents Wear & Tear
Stop stone chips, nicks & scratches in the paint, and keep your vehicle looking as good as the day It was new
Selected To Protect Your Investment
The paint protection film we use have special elastomeric polymer technologies allowing the film to self-heal from scratches or swirl marks when introduced to heat. All of the patterns we use are created and handcrafted by a professional design team, then test fitted and adjusted until the template fits precisely to the vehicle.
Edge Seal Technology
Lifting & delamination are a thing of the past. Our signature Edge Seal Technology ensures film stays stuck & keeps surfaces protected from contaminants.
Peace of mind
All paint protection films offered are backed by extensive 10 year’s warranty, against peeling, bubbling, discolouration, cracking, staining and hazeing.*
With a full range of options, you are able to choose a solution that suits both your budget and the required level of protection for your car. All options are fitted by our fully trained and certified technicians in our bespoke facility.
FAQs
Paint protection film uses a special polymer in its top clear coat that flows even though it is cured. This allows the surface to find its natural level again after being scratched or damaged on the surface.
With the application of a moderate heat to the film (between 32-40 ◦c) this can be induced by: Leaving the vehicle out in the sun, heat generated from the engine, applying warm water.
Allow a minimum of 3 days following the installation, after which frequent washing and coating (quick detailer) is recommended of the vehicle. Avoid the use of pressure washers for 3 days following the installation, keeping jets a safe distance
The film can be washed in the same way you would normally clean your vehicle. PH neutral car shampoos are recommended. We also advise washing with a micro fibre wash mitt using the two bucket method.
Yes, you may use a pressure washer provided the film has completely dried after installation (typically 3 days) and provided the high-pressure water is not pointed directly at the edges of the film. You will need to be mindful to stay around two feet away from the areas where film is applied, especially around the edges of the film.
The film can take up to 30 days to fully cure, during this period there may be some haze or condensation visible.
While you can wax the film, be sure the product you are using doesn’t contain Naphtha or Kerosene in concentrations over 5%, and avoid waxes that contain dyes.
For best results, we recommend using our QD or QD+ quick detailing sprays. These products have been specially formulated for use with polyurethane paint protection films to provide the maximum protection and gloss, while containing no ingredients that would cause discoloration over time.
We recommend that the re-sprayed paintwork be left for a minimum of four weeks to cure and harden before any paint protection film is applied. If the film is applied within this four week period then there is a risk that the paint could lift if the film is removed at a later point or during application.
Speak to us, we can carry out a test on your vehicle if it’s been ceramic coated. However we do not recommend applying these types of coatings if you are looking to have paint protection film installed as the coating on the surface leaves a low friction finish and may prevent the films adhesive to bond and cure correctly to the paint.
The films we use are all warranted for 10 years* when installed by Lussivo. This warranty covers: yellowing, staining, delaminating, peeling, and product failure and is backed by the respective manufacturer during this period.
More information on the warranty can be found on our Warranty Information page
Yes, however we recommend that the removal of the product is carried out in house by our trained and certified technicians as there are specific steps and methods required to guarantee the film is safely removed. If this is not possible please contact us for assistance
No, XPEL Paint protection film cannot be installed on your windshield. Due to the impact absorbency of paint protection film, the refractive index of the film is too different from that of the windshield. Because of this difference, putting the two together causes a distortion when looking through the glass that would be unacceptable to the vehicle’s occupants.
We do offer a specific product for windscreens.
Yes. PPF can be applied over a vinyl graphics. However, if there are any hard edges that film must cover, it could result in some air being trapped along that edge.
In most cases we can remove the decal and replace them over the top of to give a more seamless finish